Detaching The Stand Base And Body; Mounting On A Wall - LG M2250D Owner's Manual

10
ASSEMBLING AND PREPARING

Detaching the Stand Base and Body

1
Place the TV with the screen side down on a
flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
2
Turn the screw to the left, and then pull out the
Stand Base from the Stand Body.
3
Remove 2 screws and pull out the Stand Body
from the TV.

Mounting on a wall

For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
10 cm
If you intend to mount the TV to a wall, attach Wall
mounting interface (Optional parts) to the back of
the TV.
When you install the TV using the wall mounting
interface (Optional parts), attach it carefully so it
will not drop.
1
Please, Use the screw and wall mount interface
in accordance with VESA Standards.
2
If you use screw longer than standard, the TV
might be damaged internally.
3
If you use improper screw, the product might
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
4
VESA compatible only with respect to screw
mounting interface dimensions and mounting
screw specifications.
10 cm
10 cm
10 cm