Maintenance; Cleaning; References; Accessories/Replacement Parts - SKC GS-3 Cyclone Operating Instructions Manual

Maintenance

Cleaning

After sampling, clean all parts of the cyclone, including the interior of the grit pot,
with mild soapy water. The cyclone can be wiped with a clean dust-free tissue, air
dried, blown dry, or wiped with isopropyl alcohol.
Do not use strong solvents to clean the cyclone.

References

Gautam, M. and Sreenath, A., "Performance of a Respirable Multi-Inlet Cyclone Sampler," J. Aerosol
Sci., Vol. 28. No. 7, pp. 1265-1281, 1997, htt p://doi.org/fh sgrz
Trakumas, S., et al., Performance Assessment of Personal Respirable Cyclone Samplers, AIHce
Presentation 191, 2003, htt p://bit.ly/1hvQBNt (Powerpoint presentation)
OSHA Final Rule on Respirable Crystalline Silica, www.osha.gov/silica/

Accessories/Replacement Parts

Description
Replacement Cassette Adapter
Replacement Bowl Adapter
Replacement Grit Pots, pk/25
Filter Cassette/Cyclone Holder for standard 25 or 37-mm
3-piece cassettes with or without a cyclone
Standard-size Multi-purpose Calibration Jar

SKC Limited Warranty and Return Policy

SKC products are subject to the SKC Limited Warranty and Return Policy, which provides
SKC's sole liability and the buyer's exclusive remedy. To view the complete SKC Limited
Warranty and Return Policy, go to htt p://www.skcinc.com/warranty.
25 mm
37 mm
5
Cat. No.
225-101
225-102
225-108
P225012
225-1
225-111