SIG_LED PIN output status is defined according to the software protocol, and users could judge
the module's work status according to SIG_LED status. SIG_LED PIN is common I/O port, which
can't directly drive LED, and it needs to work with dynatron.
3.2 Module Power Consumption
It describes the module's power consumption under each status:
No.
1
2
3
4
3.3 Reliability Characteristics
It describes the temperature, including working temperature and storage temperature.
Working temperature: -30°C~+75°C
Storage temperature: -40°C~+85°C
第 10 页
©ZTE CORPORATION All rights reserved
Test items
Power-off leakage current
(Normal power-off)
Average standby current (no
operation after power-on)
Average standby current (after
talk)
Talk current
Typical value(mA)
50uA
2mA
2mA
128mA
This document is not allowed to
transmit without ZTE
Corporation's permission.