Advertisement
The upper basket is designed to hold items like glasses, cups, saucers,
●
plates, small bowls and shallow pans.
You can adjust the height of the upper basket to create more space for tall
●
items in the lower basket. See instructions below.
Utensil tray
Use the utensil tray to securely hold long or sharp items like knives,
●
chopsticks, or ladles. Ensure that knife blades are facing down and that
lightweight items are weighted down.
Slide or remove the utensil tray if you need the space for other items
●
below.
Fixed tine plate rack
Use the fixed tine plate rack to support saucers, small plates
●
and bowls.
The tine spacing has been optimized for maximum wash performance of
●
plates and bowls.
The fixed tine plate rack is not removable.
●
Foldaway Cup Racks
Use the cup racks to support mugs, cups and
●
glassware, and to secure large utensils and knives.
Fold the racks away if you need to make space for
●
taller items.
You can adjust these independently of each other:
1 Fold the racks up if you need the space.
3 Fold down to lock in position.
Stemware notches
These notches help
support long-stemmed
glassware.
Fold up to make room for items below
UPPER BASKET
Ensure the utensil tray is hooked
correctly onto the upper basket
Slide or remove the utensil tray if you
need the space for other items below.
Adjusting the height of the Upper Basket
IMPORTANT!
Before you adjust its height, make sure the basket is empty.
1 Turn the front safety stops on either side outwards.
2 Slide the empty basket out of the runners.
3 Reinsert the higher or lower set of rollers in the runners and slide the
basket all the way back in.
4 Turn the front safety stops inwards.
Rollers
Utensil tray
Fixed tine racks
Use the lower basket for your largest dishes:
●
pots, pans, lids, serving dishes and bowls.
Ensure dishware items do not block the spray
●
arm above from rotating.
Place larger plates between the longer tines to
●
maximise stability.
The tine spacing has been optimized for
●
maximum wash performance of plates and
bowls.
If you need more height for tall items, you can
●
raise the upper basket.
See instructions opposite.
Fixed tine
plate rack
Removable anti-nesting grid
The anti-nesting grid clips onto the top
●
of the cutlery basket.
Use the grid to separate cutlery items
●
and stop them nesting together.
Front safety stop
LOWER BASKET
CUTLERY BASKET
Loading
To reduce the risk of injury, we
●
recommend loading knives and sharp
utensils with handles facing up.
Mix spoons, knives and forks within
●
each section to stop cutlery nesting
together and to ensure the water
circulates freely. Alternatively, use
the clip-on anti-nesting grids to keep
cutlery items apart.
Keep stainless steel from touching
●
silver cutlery to avoid staining.
Removable
anti-nesting grid
591225 B / 0120501370
10.17
Advertisement
