The Correct Temperature; In The Perfectfresh Zone; Adjusting The Temperature In The Perfectfresh Zone - Miele KFN 14827 SDE ed/cs-2 Operating And Installation Instructions

It is very important to set the correct
temperature for storing food in the
appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro-organisms. Reducing the
temperature reduces their growth rate.
The temperature in the appliance will
rise:
– the more often the door is opened
and the longer it is kept open,
– the more food is stored in the
refrigerator,
– the warmer the food is which is being
put into it,
– the higher the ambient temperature
surrounding the appliance. The
appliance is designed for use within
specific ambient temperatures
(climate range). Do not use in
ambient temperatures for which it is
not designed.

. . . in the PerfectFresh zone

The temperature in the PerfectFresh
zone is controlled automatically and
maintained at 0 to 3 °C.
Automatic temperature distribution
(DynaCool)
The fan switches on automatically when
the cooling system for the PerfectFresh
zone switches on. It distributes the
temperature in the appliance to all areas
more evenly so that all the food will be
chilled to about the same degree.

The correct temperature

Adjusting the temperature in the
PerfectFresh zone
The temperature in the PerfectFresh
zone can be raised or lowered, e.g. if
you want to store items like fish.
The settings   to   have specific
temperature ranges allocated to them,
they do not represent temperatures
themselves.
The default setting for the
temperature in the PerfectFresh zone
is b5. Under certain circumstances, a
setting from b1 to b4 can cause
negative temperatures to be reached.
Food could freeze.
 Select the PerfectFresh zone .
The PerfectFresh symbol  will light
up yellow.
 You can now adjust the temperature
in the PerfectFresh zone by touching
the  sensor. You can select settings
from   to  :
–  : lowest temperature
–  : highest temperature
By touching the sensor
–  the temperature will get colder
–  the temperature will get warmer.
The temperature being set will flash in
the display.
The following information appears in the
display when the sensors are touched:
– When first tapped: The last preset
temperature flashes.
23