Escorting - Accutech LS2400 User Manual

Escorting

DISCLAIMER:
The following instructions are intended as a
guidance document only. Each facility should
review these recommendations and modify as
necessary to meet their own unique security
requirements.
NOTICE:
While escorting Tags, be aware of "tailgating."
Tailgating is the practice of Tags lingering near
a monitored zone (usually an exit point) until an
authorized escort passes through the zone then
immediately following behind through the zone.
To prevent tailgating, be aware of all traffic near
a monitored zone and once you are through the
monitored zone wait until the escort time has
timed-out before proceeding.
To escort Tags through a monitored zone, use
the following instructions:
1. Enter a valid code into the zone's
Keypad. This will invoke the Keypad's
Escort function. The Keypad's Escort
function will allow the Tag to pass
through the monitored zone for the
designated Escort time. The duration of
the Escort function is adjustable from 0
to 98 seconds (
2. Escort the Tag through the zone.
For slower moving residents,
NOTE:
you may have to invoke the Escort
function again. However, if this is the
case, an alarm may sound. Therefore,
take into consideration the Escort time
duration at that zone. If the door handles
slow moving residents often, consider
extending the Escort time or using a
wheelchair to escort residents.
3. To prevent tailgating, once you are
through the zone wait until the escort
time has timed-out before proceeding
(the green LED will extinguish).
factory set at 15 seconds
).