5 Pairing to Popular Bluetooth Congratulations and thank you for purchasing the Bluetooth Hands-Free Headset and Audio Adapter from Belkin. The Technology-Enabled Phones ....21...
1200, 2200, 3300, Adapter that plugs directly into your mobile phone with a 3500, 3600, 6500, 2.5mm jack. 8200, 8300, 8800 Belkin offers adapters for phones that do not have 2.5mm F8V9032-CNCT Samsung SGH-N625, SGH- ® jacks, so that you can easily connect them as well. Check...
Page 5
Introduction Introduction F8V9030-CNCT Siemens ® A56, C56, CT56, For phones that are enabled with Bluetooth technology F8V9004-CNCT Ericsson A2218z, R300d, ® Compatible with phones enabled with Bluetooth v1.1, R300LX, R300z, including, but not limited to: R380 world, T28 • Sony Ericsson Z600, T610, T616, T618, T68i world, T28z, T39m, •...
Introduction Introduction Controls: Multifunction volume control *10m range is dependent upon environment, number of and answer/hook toggle users, and other wireless devices within immediate proximity. button* Specifications are subject to change without notice. Antenna: Integrated, 0 +/- adbi LED Indicator: Power/Pairing Charger: 5.0V DC, 300mA...
Getting to Know your Hands-Free Headset and Getting to Know your Hands-Free Headset and Audio Adapter Audio Adapter Status Indicators Power Jack Headset LED Status SoftHold Ear Hook Multifunction 5 quick blue flashes Headset is being Button turned on 5 quick red flashes Headset is being turned off 2.5mm Plug...
Getting to Know your Hands-Free Headset and Before you Begin Audio Adapter Audio Adapter LED Status Warning: The Bluetooth Hands-Free Headset Red and blue on Adapter is being and charger feature built-in magnets that allow turned on or off them to dock with each other. Keep magnets at least two feet away from computer hard Continues blue/red flashing Adapter is in...
Page 10
Before you Begin Before you Begin Charging your Headset: Charging your Audio Adapter: 1. Plug one end of the power adapter into the desktop 1. Using the Audio Adapter charging cable, plug the charger and the other end into an available 110V AC larger end to the Audio Adapter and the other end electrical outlet.
Page 11
Before you Begin Before you Begin Adjust the Earpiece The SoftHold earpiece was designed to comfortably fit around the left or right ear. You may change the position of the earpiece simply by flipping the earpiece and snapping it into place as described below. Changing the Ear Plugs The Headset includes three interchangeable earplus that are designed to fit common ear types.
3. Without delay, press and hold the Pairing button on standard 2.5mm headset jack. Please visit the Audio Adapter for two seconds then release. The us at belkin.com or refer to the hands-free red and blue LEDs will light. connector chart on page 3 of this User Manual for information regarding 2.5mm adapters.
Page 13
Pairing to Phones NOT Enabled with Bluetooth Pairing to Popular Bluetooth Technology-Enabled Technology Phones 4. Wait eight seconds, then press and hold the Pairing You will not need to repeat this process again in the future button for two seconds. The red and blue LEDs will since your Headset and Audio Adapter are now paired.
Page 14
Do not release the button until you see 5. Scroll down to “Search for Audio Accessories”. an alternating blue and red light. This indicates the 6. Your phone will find the Belkin Headset and list it Headset is in pairing mode. under “Found Devices”.
Page 15
Bluetooth 6. Select “Phone Initiates”. Headset. 7. Select “Hands-Free” (make sure your Headset is 13. Your Headset is now ready to use. flashing blue/red). 8. Your phone will find the Belkin Headset and list it under “Found Devices”.
Page 16
LED lights switch from flashing device”. blue/red to flashing blue every three seconds. 7. Your phone will find the “Belkin Headset” and list it 11. Your Headset is now ready to use. under “Found Devices”. 8. Select Belkin Headset to initiate the pairing.
Page 17
Using Your Headset Using Your Headset Switching the Headset On and Off Continue to hold the Pairing button for twelve seconds. The LEDs will go off. To turn your Headset on, remove the Headset from the desktop charger, then press and hold the talk button until Fitting the Headset the LED indicator flashes blue five times.
Page 18
Using Your Headset Using Your Headset the talk button once to answer. Voice Dialing Non-Bluetooth and Bluetooth phones: Ending a Call If your mobile phone allows voice dialing, push the talk Non-Bluetooth phones: button to initiate it through your Headset. To end a call, use your mobile phone.
Page 19
Using Your Headset FAQs Bluetooth phones: How far away can I use my headset from my phone? To increase the volume on the Headset, push the toggle Ten meters (30 feet) depending on the environment and button upward. obstructions. Keep the Headset within six meters (18 feet) To decrease the volume on the Headset, push the toggle of the Audio Adapter or Bluetooth technology-enabled button downward.
Page 20
Can I use my Headset in the rain? The Headset will work with Bluetooth technology-enabled devices, which are Bluetooth 1.1-compliant and support the The Belkin Headset is not water-resistant. Please keep the Headset or Hands-Free profile. Check with your device’s Headset away from water at all times.
Page 21
Information Information Canada-Industry Canada (IC) We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the products, The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada. This Class B digital complies with F8T060xHDST, F8T060xDNGL, and F8T060xCHG2 Canadian ICES-003.
Page 22
Information Information Products bearing the CE marking comply with the R&TTE Wireless Notice Directive (1999/5/EC), EMC Directive (89/336/EEC), and the In some situations or environments, the use of wireless devices Low Voltage Directive (73/23/EEC) issued by the commission may be restricted. Such restrictions may apply aboard airplanes, of the European Community Compliance with these directives in hospitals, near explosives, in hazardous locations, etc.
Page 23
For customer support and for regulatory issues, contact off and on, the user is encouraged to try to correct the 1-800-2BELKIN Belkin at interference by one or more of the following measures: • Increase the separation between the equipment and receiver.
Need help?
Do you have a question about the 2270 and is the answer not in the manual?
Questions and answers