Table of Contents
Advertisement
2a
4. Afterwards screw the filter housing to the external
thread of your fitting. (Picture 3a)
5. Tighten the housing by hand.
6. Then screw the previously unscrewed shower hose to
the bottom end of the filter housing.
7. Check that the connections are correctly seated.
8. Slowly open the tap up to 1/3 and let the water run
through the filter for 1 min to activate the cartridge
for operation.
10
3a
Advertisement
Table of Contents
Need help?
Do you have a question about the Element and is the answer not in the manual?