Warning Beeping Sound - Singer 2010 Instruction Manual

WARNING FUNCTIONS

Warning beeping sound

- When operating correctly: 1 beep
- When the memory is full 20 units of pattern: 2-short beeps
- When operating incorrectly: 3-short beeps
- When the sewing machine is in trouble and can't sew: 8 seconds short beeps
It means that the thread is twisted or jammed and the hand wheel axle can't move. Please refer
to the "Trouble shooting guide" on pages 71 & 72 for solutions. After the problem has been
solved, the machine will continue to sew.
Please Note: If the problem is not resolved, please contact SINGER at www.singer.com.
Attention: During the sewing, if the thread get jammed inside the hook stopping the
needle from moving and you continue pressing the foot control, the security switch will
stop the machine completely. In order to restart the sewing machine, you will have to turn
the on/off switch to the OFF position and then ON again.
Return bobbin winder shaft to left
If the bobbin winder shaft is positioned to the
right (engaged) and any button is pressed a 3-
beep warning will be sounded. Move bobbin
winder shaft to the left (disengaged) to allow
the buttons to be operational.