Using The Needle Threader - Singer 2010 Instruction Manual

USING THE NEEDLE THREADER

1
2
3
4
Attention: Turn power switch to the off
position ("O").
Raise the needle to its highest position and
lower the presser foot.
1
1 Lower the needle threader lever slowly and
draw the thread through the thread guide as
illustrated and then to the right.
2
2 The needle threader automatically turns to the
threading position and the hook pin passes
through the needle eye.
3
3 Take the thread in front of the needle.
4
4 Hold the thread loosely and release the lever
slowly. The hook will turn and pass the thread
through the needle eye forming a loop.
Pull the thread through the needle eye.