Advertisement
Available languages
Available languages
20
PREPARATION
1
2
Outlet gasket should be
greased.
The outlet unit should be
attached to the drain unit.
If the outlet unit is already
fitted, go to step 3.
SIDE INLET
3
4
5
UK
DK
If side inlets are to be used,
the 'wall' should be knocked
out with 3-4 taps around the
inner edge with a normal
hammer and a flat-headed
screwdriver/chisel.
Water trap does not cover
side inlets.
Side inlet pipe diameter
is 50 mm.
3 rubber nipples are provided
for pipe connection:
1 x 32 mm and 2 x 40 mm.
NB! The grey pipe and socket
shown are not included.
NB: Any side inlet pipes may
only be inserted to a depth
of 50 mm.
Advertisement
