Table of Contents
Advertisement
22. Some dust created by power/hand sanding, sawing, grinding, drilling, and other
construction activities, contain chemicals known [to the State of California] to
cause cancer, birth defects or other reproductive harm. Some examples of
these chemicals are:
A) Lead from lead-based paints,
B) Crystalline silica from bricks and cement or other masonry products,
C) Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles. (California Health &
Safety Code § 25249.5, et seq. )
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
When unpacking, check to make sure that all the parts are included. Refer to the
Parts List and Parts Diagram at the end of this manual. If any parts are missing or
broken, please call Harbor Freight Tools at the number on the cover of this manual as
soon as possible.
Air Connection
1.
Attach an air hose (not supplied) to the Air
Inlet (56) fitting.
2.
Optionally, for easy connection or removal,
attach an Air Quick-coupler (not supplied)
to the hose and Air Inlet (56) fitting.
3.
Retighten all couplings and fittings. See photos on the next page.
Oiler and Filter Connection
Dirt, water, and the lack of pneumatic tool oil are major causes for tool wear. Install
an optional oiler-filter, as illustrated below for better performance.
1.
Connect the air tool, air hoses, filter, and oiler to the Compressor Air Outlet as
illustrated below.
The filter and oiler (not supplied) are recommended but not mandatory for operation.
SKU 93900
For technical questions, please call 1-800-444-3353.
Unpacking
Assembly
Air Inlet (56)
Page 4
Advertisement
Table of Contents
