Table of Contents
Advertisement
10. Do not force tool. It will do the job better and more safely at the rate for which
it was intended. Do not use inappropriate attachments in an attempt to exceed
the tool capacity.
11. Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. Do not modify this tool and do not use this tool for a
purpose for which it was not intended.
12. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear
are recommended when working. Wear restrictive hair covering to contain long
hair.
13. Use eye and ear protection. Always wear ANSI-approved impact safety goggles.
Wear a NIOSH-approved dust mask or respirator when working around metal,
wood, and chemical dusts and mists. Wear ear plugs.
14. Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running machines.
15. Maintain tools with care. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories. Inspect
tool periodically and, if damaged, have them repaired by an authorized technician.
The handles must be kept clean, dry, and free from oil and grease at all times.
16. Remove adjusting keys and wrenches. Check that keys and adjusting
wrenches are removed from the tool before operating.
17. Stay alert. Watch what you are doing, use common sense. Do not operate any
tool when you are tired.
18. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are available
from Harbor Freight Tools.
19. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
20. Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment and binding of moving parts; any
broken parts or mounting fixtures; and any other condition that may affect proper
operation. Any part that is damaged should be properly repaired or replaced by
a qualified technician. Do not use the tool if any switch does not turn On and Off
properly.
21. Do not operate tool if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
SKU 93900
For technical questions, please call 1-800-444-3353.
Page 3
Advertisement
Table of Contents
