Introduction - Akai LT-2402AB User Manual

Thank you very much for your purchase of our product of LCD TV. It serves as
a normal colour TV and PC monitor. To enjoy your set to the full from the very
beginning, read this manual carefully and keep it handy for ready reference.
① Locate the receiver in the room where direct light does not strike the screen. Total
darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect
lighting is recommended for comfortable viewing.
② Allow enough space between the receiver and the wall to permit ventilation.
③ Avoid excessively warm locations to prevent possible damage to the cabinet or
premature component failure.
④ This TV receiver can be connected to
⑤ Do not install the receiver in a location near heat sources such as radiator, air
ducts, direct sunlight, or in a place somewhere like close compartment and close area.
Do not cover the ventilation openings when using the set.
⑥ The indicator light will last 3 to 4 seconds to go out after cutting off the electricity, during this
period, you cannot repower it on until the indicator light goes out, thanks a lot for your attention!

Introduction

INSTALLATION
AC180-240V~ 50/60HZ
- 1 -