Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sonosax SX-RC8+
Summary of Contents for Sonosax SX-RC8+
- Page 1 SX-R4+ FADER EXTENSION MODULE SONOSAX SX-RC8+ USER MANUAL Version 1.2 February 2019 Audio equipment manufacturer SONOSAX SAS S.A. Ch. de la Naz 38 CH-1052 Le Mont-sur-Lausanne Switzerland http://www.sonosax.ch sonosax@sonosax.ch...
-
Page 2: Table Of Contents
Table of Contents 1 Introduction........................... 3 1.1 Key Features......................3 1.2 Functional Block Diagram................... 3 2 Panel Descriptions........................4 2.1 Front Panel......................... 4 2.2 Side Panels........................ 4 3 Operating Instruction........................5 3.1 Connecting to the SX-R4+..................5 3.2 Operating modes......................5 3.3 AES Breakout...................... -
Page 3: Introduction
SX-R4+ providing 8 rotary faders with function switch to extend mixing facilities in the field. As with all SONOSAX products, the SX-RC8+ is build without any compromise in quality, using only the best components available and passes severe quality controls. -
Page 4: Panel Descriptions
2 Panel Descriptions Front Panel F1 to F8 Fader with push on Internal Slate/Com microphone Cut-out for shoulder strap Side Panels LEFT RIGHT H1 to H5 D1 to D4 Power Distribution AES inputs TA3 male (mini-XLR). D4 (AES 7-8) is shared with MIC operation Phones 3M MDR 26-pin for SX-R4+ interconnect SX-RC8+ User Manual... -
Page 5: Operating Instruction
3 Operating Instruction Connecting to the SX-R4+ 3M MDR 26-pin pin-to-pin cable is required to interconnect the SX-RC8+ to the SX- R4+. The SX-RC8+ is powered by the SX-R4+ and operates as soon as it is connected to it. Operating modes The SX-R4+ menu SETUP/POT SETUP allow to select 3 different operating modes:... -
Page 6: Slate/Com Microphone Control
Slate/Com Microphone Control The SX-RC8+ includes a microphone preamplifier with automatic gain control and Low Frequency Cut filter. User can choose between the front panel mic or an external headset connected to the Headset/Headphones 3.5mm jack. The SX-RC8+ configuration is integrated into the SX-R4+ touch interface. -
Page 7: Specifications
4 Specifications Microphone Preamplifier Sampling Frequency 48 kHz Bit Depth 16-bit Power Input Voltage +3.3 V on 3M MDR 26-pin Power consumption 200 mW (mic OFF) 255 mW (mic ON) Mechanical Size (H x W x D) 200 x 50 x 57 mm 7.87 x 1.96 x 2.24 ‘’... -
Page 8: Connector Pin Assignments
5 Connector Pin Assignments 3M MDR 26-pin AES 1-2 (-) AES 3-4 (-) AES 5-6 (-) AES 7-8 (-) RS422 RX (-) RS422 TX (-) Headphones Right AES 1-2 (+) AES 3-4 (+) AES 5-6 (+) AES 7-8 (+) RS422 RX (+) RS422 TX (+) DC 3.3V input Headphones Ground...
Need help?
Do you have a question about the SX-RC8+ and is the answer not in the manual?
Questions and answers