Overview; Fbiu - Dekolink MW-FBDA-PCS-xxx-50W Installation And Operating Manual
High power fiber-optic repeater system & fiberopticbase interface unit
Hide thumbs
Also See for MW-FBDA-PCS-xxx-50W:
Table of Contents
Advertisement
1. OVERVIEW:
The Fiber optic repeater system is an excellent solution for BTS coverage
extension by means of Fiber optic link and remote high power RF head.
The system consists of two conversion boxes;
FBIU (Fiberoptic Base Interface Unit)
-
-
FBDA (Fiber optic Bi Directional Amplifier)
One fiber, for both uplink and downlink directions connect the FBIU to the
FBDA. Using fiberoptic cable allows long distance transmission, up to 20 Km.
1.1 FBIU
The FBIU is installed near the BTS and is connected to the BTS by RF
cables. A Fiberoptic transceiver converts the Downlink RF signals to optical
signals and the uplink optical signal to RF. A high power attenuator is used
as power adjustment between BTS Tx power and Fiberoptic transceiver
requirements. A separate attenuator is used for Rx direction.
FO-50W SYS
Dekolink WIRELESS Ltd.
16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510
Tel- 972-3-9180-180 Fax-972-3-
e-mail:
marketing@dekolink.com
9180
-
190
web
www.dekolink.com
Page 3 of 12
Advertisement
Table of Contents
