Table of Contents
Advertisement
6
Commissioning
Commissioning of the device is always carried out via the Web-based surface of the System
Access Point. It is assumed that the basic commissioning steps of the overall system have
already been carried out. Knowledge about the Web-based commissioning software of the
System Access Point is assumed.
The System Access Point establishes the connection between the free@home participants and
the smartphone, tablet or PC. The System Access Point is used to identify and program the
participants during commissioning.
When energized, Basic and Comfort thermostats that have not been programmed are in
programming mode for 10 minutes and can be logged into the system. Programmed devices
share information about their type and supported functions with the System Access Point.
During initial commissioning all devices are given a universal name. The installer must change
this name within the commissioning process to a name practical and specific for the system.
The devices must be parameterised for the use of additional functions.
Note
General information about commissioning and parameterization is available in
the ABB-free@home
6.1
Coupling of wireless devices with the System Access Point
6.1.1
Coupling devices
free@home wireless devices must first be coupled with the System Access Point before they
can be used in a project. The devices exchange a security key during the coupling process.
Communication between devices is carried out encrypted after coupling and they are firmly
connected with the System Access Point. Coupled devices cannot be connected with a different
System Access Point. They must first be reset to the factory settings.
Note
Separate commissioning is carried out for thermostats.
Carry out the following steps to couple one or several devices with the system:
1. Install the free@home wireless device(s).
2. Use your smartphone, tablet or PC to call up the user interface of the System Access Point
that is ready for use.
3. Remove the batteries from the device.
4. Start the scanning mode ("Settings" > "free@home-Wireless" > "Search for wireless
devices").
Product manual 2CKA001473B9364
®
system manual.
Commissioning
│18
Advertisement
Table of Contents
