6.1.2
Resetting the wireless device (thermostat) to the factory settings
1. Remove the batteries from the device and wait for 30 seconds.
2. Insert the batteries again and keep the button [1] pressed for at least 10 seconds, until the
LED stops flashing.
The factory settings are restored and the device can now be programmed again.
6.2
Allocation of devices and definition of channels
The devices connected to the system must be identified, i.e. they are allocated to a room
according to their function and are given a practical name.
The allocation is made via the "Devices" allocation function of the Web-based
user interface of the System Access Point.
The following figures show an example of the Basic version.
Always ensure that the correct filter is set, so that the correct device group is displayed.
Product manual 2CKA001473B9364
1
Radiator thermostat, Basic
Commissioning
ECO
1
Radiator thermostat, Comfort
│20