Position - Belkin OmniView ENTERPRISE Quad-Bus Series Quick Installation Manual

Kvm switch with cat5 extension, control up to 16 servers located up to 1000 feet away from your kvm switch with up to two consoles

Hide thumbs Also See for OmniView ENTERPRISE Quad-Bus Series:

Table of Contents

Available languages

P74344ea_F1DW116-216C_QIG

Step 2: Connect the console monitor, keyboard, and mouse to the console ports

of the primary Switch(es).

Step 3: Connect the computers to the Switch as previously described for

standalone Switches, as previously described for standalone units,

skipping Steps 5 and 8.

Step 4: Attach the Daisy-Chain Cable (Belkin part number F1D9402-XX) to an

available daisy-chain port of the previous Switch, making sure

that the Daisy-Chain Cables are only connected in an "in-to-out" or

"out-to-in" configuration.

Step 5: Power up the connected servers. Check for keyboard, video, and

mouse function.

17-10-2003

16:51

Page 7

Table of Contents

Omniview f1dw116c Omniview f1dw216c