Page 3
HPI25 User Manual WARNING When Installing the Unit When the Unit is in Use • Do not expose the unit to rain or an • Turn down the amplifier before switching environment where it may be exposed to on the amplifier. If there is no sound, water or other liquids, as doing so may check the speaker connections.
(See HPI Series bass speaker top or the base of the cabinet for precise systems). control of HF coverage. The HPI25, like all speakers in the HPI Series Functional Design have been designed to deliver high fidelity The recessed input panel and innovative...
If you are intending to add Suitable Amplification sub bass speakers or use for mainly vocal The HPI25 is an 8 ohm enclosure and can be reproduction, the high pass filter should also connected in multiple parallel connections to be set to 80Hz.
Compression Driver 1.0" exit (1.4"voice-coil, 25Wrms, 8ohms) T1011 3bis compression driver recone (diaphragm for T1011) RT1011 Complete grill for HPI25 (perforated steel with acoustic foam) HGHPI25 horn-flare for HPI25 (plastic injected PP) HWGHPI25 Passive filter network (assembly) for HPI25 AXHPI25...
Page 8
Register Your Product Thank you for choosing Quest. Please take the time to complete your product registration card which is included with the packaging. Registering your Quest Engineering product will: • CONFIRM YOUR WARRANTY • REGISTER YOUR PRODUCT • PROTECT YOUR NEW PRODUCT REGISTER ONLINE: www.questengineering.com.au/registration...