Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Quest Engineering HPi110
Summary of Contents for Quest Engineering HPi110
- Page 1 User Manual HPi110 & HPi210 Quick Rig (QR) Systems...
-
Page 2: Table Of Contents
Kit – QRUB: HPi110 U-Bracket . . . . . . . . . . . . . . . . . . -
Page 3: Introduction
HPi110 and HPi210 models . The HPi110/210 can be flown with weight rated high tensile eye bolts inserted into the many box inserts but this can only be done following the standard rigging conventions understood by licensed riggers . -
Page 4: Safety Matters And Precautions
• Do not mount the unit in locations exposed to constant excessive vibration . Fittings on the mounting bracket or fly-ware may become loose causing components to detach and cause injury below . User Manual HPi110 & HPi210 Quick Rig (QR) Systems... -
Page 5: Simple Hanging Without Accessories
The structure and construction of the HPi110/210 allow for a variety of hanging possibilities . Both the HPi110 and HPi210 include 9 x M10 lifting points, and as well as a pole mount plate, to bring maximum flexibility even without additional accessories . -
Page 6: Kit Summary
• Extra vertical Tilt (+25/+45˚) • 3 speakers • Hanging Kit QR4 • Hanging Plate 3 • Variable angle between Order Ref: • Screws (6x M10) Speakers ACHPiQR4 • Vertical Tilt (+15/+20˚ approx) User Manual HPi110 & HPi210 Quick Rig (QR) Systems... - Page 7 • Bracket bottom plate Order Ref: • Mounting on walls/ truss • M6 flat head (x1) ACHPiWB110 • Variable angulations (-15˚ • M10 flat head (x2) to 90˚ in both directions) HPi110 & HPi210 Quick Rig (QR) Systems User Manual...
-
Page 8: Kit Qr1: Fixed Wall Mounting Without Panning
. Ordering reference: ACHPiATS The i-Spine comes with an M8x50 custom Quick Pin (Q-Pin) as well as a pair of long M10 counter sunk screws . User Manual HPi110 & HPi210 Quick Rig (QR) Systems... -
Page 9: Mounting The Speaker & Rigging System
HPi110 & HPi210 Quick Rig (QR) Systems Mounting The Speaker & Rigging System Installation of the Spine on the HPi110 Remove the 2 top Swing it flat on the Bolt in and secure screws that are top of the speaker . -
Page 10: Setting The Angle Of The Cabinet
0 degrees 7 .5 degrees 15 degrees 30 degrees HPi110 with Kit QR1 Long Side Plates HPi110 with Kit QR1 Standard The standard kit offers the possibility to hang If extra tilt (15˚ or 30˚) is needed, optional a speaker at 0˚ and 7.5˚. -
Page 11: Kit Qr2: Fixed Wall Mounting Tilt And Pan
The i-Spine comes with an M8x50 custom Quick Pin (Q-Pin) as well as a pair of long M10 counter sunk screws . The kit QR1 (standard kit for fixed wall mounting installations) comes complete and assembled, with the right screws and bolts to install a single HPi110 . Option Note for QR-2 (Available as a separate component) •... -
Page 12: Installation Of The Spine On The Hpi110
The t-Spine can also be used as part of a more complex rigging system . Ordering reference: ACHPiATS Installation of the Spine on the HPi110 Remove the 2 top Swing it flat on the Bolt in and secure screws that are top of the speaker . -
Page 13: Setting The Angle Of The Cabinet
HPi110 & HPi210 Quick Rig (QR) Systems Installing an HPi110 becomes easy with the QR wall-mounting system . Once the spine has been installed (as described above) install the wall-mount as follows: 1 . Bolt the wall mount assembly (without the speaker attached) onto the wall . - Page 14 . Tighten the top screw Turn the Cabinet Swivel of a HPi110 mounted on a kit QR2 If more vertical angle is required, two optional side plate can be inserted in the assembly (replacing the medium plates), and give the ability to either set the speaker closer to the wall, or reach a down tilt of 15 or 30 degrees .
- Page 15 Standard medium side plates replaced by spacers (the speaker is looser to the wall) Tilt = 7.5˚ Pan=+30˚ Standard medium side plates Tilt = 30˚ Pan=+45˚ Standard medium side plates replaced by long plates HPi110 & HPi210 Quick Rig (QR) Systems User Manual...
-
Page 16: Kit Qr3: Horizontal Two Speaker Array
HPi110 Installed with QR3 Kit The QR3 kit allows for a pair of HPi110 or HPi210 speakers to be hung horizontally with the utmost of ease . The top plate has several fastening positions which provide several options for speaker positioning providing complete control over the dispersion of audio . -
Page 17: Mounting The Speaker & Rigging System
Please ensure that regardless of the angle, each speaker is secured with 2 x M10 screws . Installation Examples 2 HPi110 in a dual horizontal array : kit QR4 ; angle=30˚ (Standard) 2 HPi110 in a dual horizontal array : kit QR4 ; angle=40˚... -
Page 18: Kit - Qr4: Horizontal Tri Speaker Array
HPi110 Installed with QR4 Kit The QR4 kit allows for three HPi110 or HPi210 speakers to be hung horizontally with the utmost of ease . The top plate has several fastening positions which allowing you to adjust the angles of the left and right speakers providing complete control over the dispersion of audio . -
Page 19: Mounting The Speaker & Rigging System
2 . Place the hanging plate on top of the 3 speakers and align to the desired angles . Top view of 3 x HPi110’s installed with the QR4 kit . 3 . Bolt in the 6 M10 x35 counter sunk screws included in the kit . -
Page 20: Kit - Qr3X & Qr4X: Extended Horizontal Arrays
• Extra Vertical Tilt (-25/+45 o) QR4X Kit HPi110 Installed with QR4X Kit The QR3X and QR4X kits include an extension arm which increases the array cluster’s tilt to achieve angles between 15˚ and 35˚. User Manual HPi110 & HPi210 Quick Rig (QR) Systems... -
Page 21: Controlling The Tilt Of The Array
The extension arm provides the possibility of giving the whole assembly extra tilt of up to 35 degrees . Angles with standard hanging plate: +10˚ +5˚ 0˚ -5˚ -10˚ Angles with extension arm: -15˚ -20˚ -25˚ -30˚ -35˚ HPi110 & HPi210 Quick Rig (QR) Systems User Manual... - Page 22 . HPi110 Installed with QR5 Kit QR5 Kit User Manual HPi110 & HPi210 Quick Rig (QR) Systems...
-
Page 23: Attaching The Brackets To The Boxes
(compare to the first one) by sliding the or after the top cabinet is flown) quick pin in the slots (operation similar to selecting the angle for the Wall Mount assemblies) . HPi110 & HPi210 Quick Rig (QR) Systems User Manual... -
Page 24: Kit - Qrub: Hpi110 U-Bracket
(-15˚ to 90˚ in both directions) The QR-UB is a horizontal single speaker mounting bracket designed for mounting a single HPi110 in a permanent low profile horizontal installation . The bracket can also be attached to a scaffold clamp for fixing to truss in a mobile installation . -
Page 25: Mounting The Speaker & Rigging System
Configuring the Horn Flare Wave Guide for Horizontal Installation The HPi110 is equipped with a rotatable asymmetric horn flare which can be used in harmony with the QR-UB bracket to ensure that acoustic dispersion is accurately configured to suit the requirement of the installation . -
Page 26: Summary Of Separate Assemblies & Parts
• Stand alone Touring Spine • t-Spine • All kits using the Assembly touring spine • 1x M8x50 lock pin • Wall mount • 2x M10 screws Order Ref:ACHPiATS • Vertical array User Manual HPi110 & HPi210 Quick Rig (QR) Systems... -
Page 27: Spare Parts Table
ACHPiSW2 ACHPiLB Fasteners ACHPiEX1 HFSB810 M6 – 8x10 shoulder bolt HFW8Z 8mm washer zinc plated HFNUT6N M6 nylock nut ACHPiEX2 HFRH820 M8 x 20 round-head hex HFCS1035 M10 x30 countersunk hex HPi110 & HPi210 Quick Rig (QR) Systems User Manual... - Page 28 Quest Engineering Pty Ltd 86 Derby St. Pascoe Vale VIC 3055 Ph 613 9354 9133 | Fax 613 9354 9233...
Need help?
Do you have a question about the HPi110 and is the answer not in the manual?
Questions and answers