Folding the seat from the rear
Check that no object, either on or underneath
the seat, could hinder its movement.
Move the corresponding front seat
forwards if necessary.
Check that the seat belt is positioned
correctly on the side of the seat back.
Place the head restraints in the low
position or remove them if necessary.
Pull the control 1 forwards to release the
seat back 2 which tilts easily onto the seat
cushion 3 .
Returning the seat back to its original position
Put the seat back in the upright position
and secure it, the seat cushion also returns
to its original position.
Check that the red indicator, located at the
control 1 , is no longer visible,
Refit the head restraints or put them back
in place.
When returning the rear seat back to its original
position, take care not to trap the seat belts and
ensure that their buckles are positioned correctly.
The seat cushion lowers to be covered
by the seat back; this leaves a flat boot
floor, if the adjustable floor is in the
intermediate position.
Comfort
3
71
Need help?
Do you have a question about the 3008 and is the answer not in the manual?