Lighting Stalk; Main Lighting; Additional Lighting; Visibility - PEUGEOT 4007 Handbook

VISIBILITY

LIGHTING STALK

NG STALK

Main lighting

The various front and rear lamps of the
vehicle are designed to adapt the driver's
visibility progressively in relation to the cli-
matic conditions:
- sidelamps, to be seen,
- dipped beam headlamps to see
without dazzling other drivers,
4
- main beam headlamps to see clearly
when the road is clear.

Additional lighting

Other lamps are installed to fulfi l the re-
quirements of particular driving conditions:
- rear foglamps to be seen from a dis-
tance,
- front foglamps
visibility,
- daytime running lamps to be seen
during the day.
Certain functions of the lighting
stalk (automatic illumination of
headlamps, sensitivity) can be
confi gured via the colour screen
"Equipment" menu.
for even better
Manual controls
The lighting is controlled directly by the
driver by means of the ring A and the
stalk B .
A. Main lighting mode selection ring:
turn it to position the symbol re-
quired facing the mark.
Lamps off.
Automatic illumination

headlamps.

Sidelamps.
Dipped headlamps or main
beam headlamps.
B. Stalk for switching headlamps: pull
the stalk towards you to switch the
lighting between dipped and main
beam headlamps.
In the lamps off and sidelamps modes, the
driver can switch on the main beam head-
lamps temporarily ("headlamp fl ash") by
maintaining a pull on the stalk.
Displays
Illumination of the corresponding indica-
tor lamp in the instrument panel confi rms
that the lighting selected is on.
of