Cvt Gearbox; Gear Lever Positions; Moving Off - PEUGEOT 4007 Handbook

CVT GEARBOX

CVT GEA
The six-speed automatic gearbox of-
fers a choice between the comfort of
automatic regulation or the pleasure of
manual gear changing.
This gearbox has two driving modes:
- an automated mode for automatic
control of the gears by the gearbox
and therefore without any action on
the part of the driver,
- a sequential mode
changing of the gears by the driver
using the steering mounted controls
or the gear lever.
It consists of the following controls:
- a gear lever 1 on the centre console
for selecting the driving mode, reverse
gear and neutral or for changing gear
in sequential mode,
for manual
- a "-" steering mounted control pad-
dle 2 for sequential downward gear
changes,
- a "+" steering mounted control pad-
dle 3 for sequential upward gear
changes.

Gear lever positions

N : neutral.
With your foot on the brake, select this
position to start.
R : reverse gear.
With the vehicle stationary, keep your
foot on the brake pedal and push the
gear lever forwards.
D : automated mode.
Move the lever backwards to select this
mode.
+/-: sequential mode with manual gear
changing.
DRIVING
Move the lever backwards, then to the
left to select this mode, then:
- push forward to change up,
- push backward to change down.
Functions of the steering
mounted control paddles
+ : manual gear changing in sequential
mode.
Press behind the "+" steering mounted
control paddle to change up.
- : manual gear changing in sequential
mode.
Press behind the "-" steering mounted
control paddle to change down.

Moving off

Select position N .
7