Table of Contents
Advertisement
SCREEN DISPLAY
■ DISPLAY IN MEASURING MODE
• Double tiered display
The unit can select and display any two items out of input
engineering value, input scaling value, % value*, output en-
gineering value, and output scaling value.
INP (Scaling)
12.34
L / min
PERCENT
50.00
%
• Single tiered display
When displayed item is one, it is available to show big char-
acters in single tiered display.
Item name
INPUT
20.00
Value
Unit
mA
Refer to the Display setting of the Advanced mode for
settings.
* Percent value for input.
Item name
Value
Upper
Unit
Item name
Value
Lower
Unit
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: + 81 ( 6 ) 6659-8201 Fax: + 81 ( 6 ) 6659-8510 E-mail: info@m-system.co.jp
■ DISPLAY IN EACH SETTING MODE
For each setting, current values of setting parameter, ITEM
number and setting value are indicated. During setting,
'(Setting)' is indicated at the side of 'DATA' display.
If the power is mistakenly shut down during setting, set-
ting values are discarded. (Return to the value before set-
ting change.) Setting display previously displayed before
power shutdown is indicated at next power up.
Setting parameter
Input range
ITEM
Item number
11
DATA (Setting)
Setting Value
-10–+10V
The long setting parameter is indicated by scrolling.
0% input scaling
ITEM
14
DATA
0.00
■ DISPLAY TIMEOUT
When there is no operation within the setting time of dis-
play timeout, display is turned off. Pressing Mode, Set, Up
or Down button or occurring error enables to return from
display off. Set '0' to display 'always on'.
M2EXV
Indicated by scrolling
EM-5133-B Rev1 P. 4 / 18
Advertisement
Table of Contents
