Summary of Contents for NetterVibration AP 117
- Page 1 Operating Instructions for October 2015 Netter Electronic Timer BA No. 1651E Type AP 117 Page 1/16 These operating instructions apply to: Type AP 117...
-
Page 2: Table Of Contents
MAINTENANCE / SERVICE TROUBLESHOOTING WASTE DISPOSAL ENCLOSURES Scope of delivery The AP 117 are delivered with the follow- Check the packaging for possible signs of ing components as standard: transport damage. • In the event of damage to the packaging, Electronic Timer AP 117 •... -
Page 3: General Notes
• improper use nance, fault elimination and disassem- • unauthorized repairs bly of the AP 117 must only be per- • technical modifications formed by persons who have been • use of inadmissible spare parts instructed in the proper handling of the units. - Page 4 FRIENDLY posal. DISPOSAL Information on the AP 117 Netter type AP 117 electronic timers Special features comply with the directive for electromag- • Digital adjustment, exact to the second netic compatibility 2014/30/EU and the •...
-
Page 5: Safety
Electronic timers are used wherever a improper. procedure needs to be time-controlled. The electronic timer has no safety de- AP 117 electronic timers are suitable vices of its own. for timed activation of electric external Qualified Personnel: vibrators, solenoid valves and motor Installation, start-up, maintenance and overheating protection. -
Page 6: Technical Data
3 Technical Data Duty time (RUN): Exact to the second, up to max. 99h 59min 59s Clock duty time: Exact to the second, from 0 to max. 59 s Clock pause time: Exact to the second, from 0 to max. 59 s Pause time (PAUSE): Exact to the second, up to max. - Page 7 Dimensions Cable gland...
-
Page 8: Design And Function
Mounting bores Sensor cover ON /OFF switch (standby) no disconnection! AP 117 has two functions: Function “cascade / interval / pulse • Function “standard” mode”: • Function “cascade / interval / pulse The sequence begins with the duty time, which can be adjusted from 1 s to mode”... -
Page 9: Transport And Storage
Function “standard” PAUSE Function “cascade / interval / pulse mode” PAUSE RUN = duty time R 2 = clock duty time PAUSE = pause time P 2 = clock pause time 5 Transport and Storage Check the packaging for possible signs of transport damage. In the event of damage to the packaging, check that the contents are complete and undamaged. -
Page 10: Installation
AP 117. Cables and earthing conductors must be connected according to the respective regulations. The conductors in the supply cable for connection of the AP 117 to the power CAUTION supply must be temperature-resistant and have a sufficiently large cross- section matching the used cable length. - Page 11 Opening housing cover: ATTENTION: The AP 117 cover may only be opened by authorized specialists. DANGER Slide screwdriver into the opening slit Flip cover open to the left side. and turn. Connection: Direct voltage If direct voltage (DC) is applied to the...
-
Page 12: Start-Up / Operation
In standby mode the red LED flashes. In the adjusting or operating mode the LED lights when active keys are touched. IMPORTANT When switched on the AP 117 starts immediately with the DANGER stored time values. The connected devices also start immediately. AUTOMATIC START The sensor keys react to slight touching, not to pressing. - Page 13 Function “standard” Adjusting the duty time: Adjusting the pause time: • If the timer is switched off, the out- • If the timer is switched off, the out- puts (terminals 4-5) puts (terminals 4-5) energized. energized. • Touch the key •...
- Page 14 Function “cascade / interval / pulse mode” The adjustment of the duty and pause time is carried out in the same way as in the function “standard”. IMPORTANT Adjusting the clock duty time: Adjusting the clock pause time: • If the timer is switched off, the out- •...
-
Page 15: Maintenance / Service
(at least every 6 months) for signs of porosity. All other parts are maintenance-free. 9 Troubleshooting ATTENTION: Troubleshooting of AP 117 electronic timers should only be conducted by an authorized specialist. DANGER Fault Possible causes... -
Page 16: Waste Disposal
10 Waste disposal Material specifications: Electronic timer AP 117 Housing Polycarbonate Cover All devices can be disposed of through Netter GmbH. The applicable disposal prices are available upon request. ENVIRONMENTALLY FRIENDLY DISPOSAL 11 Enclosures Enclosure(s): Additional information available upon request:...