Philips 86BDL4152T User Manual page 65

86BDL4152T
Specific commands to control monitors are defined in a separate
Monitor Control Command Set (MCCS) standard.
DDC/CI monitors are sometimes supplied with an external color
sensor to allow automatic calibration of the monitor's color balance.
Some tilting DDC/CI monitors support an auto pivot function, where
a rotation sensor in the monitor enables the operating system to keep
the display upright as the monitor is moved between its portrait and
landscape positions.
The following DDC/CI commands should be supported via command
line:
No. Commands
1 Set Brightness
2 Set Contrast
3 Set Red Gain
4 Set Green Gain
5 Set Blue Gain
NOTE: This item applies to VGA input only.
HDMI with One Wire
CEC control.
• {Off} - Disable CEC.(Default)
• {On} - Enable CEC.
Auto signal detection
This function allows the system to detect and display the available signal
sources automatically.
• {Off} - Once a signal is connected, it can only be selected manually.
If the selected input has no signal, sset the system to display the image
automatically according to the search order of each option.
The options are: {All} / {PC source only} / {Video source only} /
{Failover}
• {All}: DP / HDMI1 / HDMI2 / HDMI3 / DVI / VGA / Component /
OPS.
• {Failover}
- Failover 1-12: User-defined setting. Default: HDMI.
OPS settings
Set the OPS configuration under each power condition.
• {Auto} - After selecting {Card OPS} for video source input, the
OPS will be set to off when the display power is set to off, or vice
versa. If you set to other video source inputs, the OPS will always be
set to on.
• {Always off} - The OPS will always be set to off.
• {Always on} - The OPS will always be set to on.
Language
Select the language used in the OSD menu.
The options are: English/Deutsch/ 简体中文 /Français/Italiano/Español/
Pyccкий/Polski/Türkçe/ 繁體中文 / 日本語 /Português/
Svenska/Finnish/Norsk/Nederlands.
OSD Transparency
Adjust the transparency of the OSD menu.
Value: Off(0)-100, default is Off.
USB cloning
Import/Export user settings.
• {Import}: Import user settings from USB flash device.
• {Export}: Export user settings to USB flash device.
No. Commands
6 Get Brightness
7 Get Contrast
8 Get Red Gain
9 Get Green Gain
10 Get Blue Gain
/Danish/
Advanced option reset
Reset all settings except {Date and Time} in the Advanced option menu
to factory preset values.
1. Press [OK] or [ ] button to enter the submenu.
2. Press [ ] or [ ] button to select {Reset} and press the [OK]
button to restore settings to factory preset values.
3. Press the [ ] button or select {Cancel} and press the [OK]
button to cancel and return to the previous menu.
APM
Power save setting.
• Off (TCP off/WOL off) - WOL not supported / wake up on TCP
socket not supported.
• Mode 1 (TCP off/WOL on) - WOL supported / wake up on TCP
socket not supported.
• Mode 2 (TCP on/WOL off) - WOL not supported / wake up on
TCP socket supported.
6.2.8. Input menu
Video source
Configuration 2
Sub 1
Sub 2
Advanced option
Sub 3
Audio source
Input
PIP audio
Card OPS audio
Input reset
Video source
Select a video input source.
The options are: {Displayport} / {DVI-D} / {VGA} / {HDMI1} / {HDMI2}
/ {HDMI3} / {Media Player} / {BROWSER} / {SmartCMS} / {PDF
Player} / {Custom} / {Card OPS}.
Sub 1
Select the input signal for the sub Win1 picture.
Choose from: {Displayport} / {DVI-D} / {VGA} / {HDMI1} / {HDMI2} /
{HDMI3} / {Media Player} / {BROWSER} / {SmartCMS} / {PDF Player}
/ {Custom} / {Card OPS}.
Sub 2
Select the input signal for the sub Win2 picture.
The options are: {Displayport} / {DVI-D} / {VGA} / {HDMI1} / {HDMI2}
/ {HDMI3} / {Media Player} / {BROWSER} / {SmartCMS} / {PDF
Player} / {Custom} / {Card OPS}.
54
VGA
VGA
VGA
VGA
Audio 1
Main
Digital
Cancel