Run The 2 Kw Interconnection Cable (Ns003100/Ns003101) To The Radar Processor - Navico MN000802A-G Installation Manual

9 Yellow
10 White (big)
Shell Braid shield
6.2 Run the 2 kW interconnection cable (NS003100/NS003101)
to the radar processor
Run the 2 kW interconnection cable (NS003100/NS003101) from the scanner to the radar
processor.
Push the round connector (A) of the 2 kW interconnection cable into the scanner connection on
the radar processor and tighten the locking nut.
The interconnection cable pin details are provided here for information, in case the connector
needs to be removed to feed the cable, or in case the cable needs to be shortened.
The front view of the 2 kW interconnection cable is shown above.
2 kW interconnection cable pin details
Pin Color/Name
1 Green (big)
2 Yellow (big)
3 Green (thin)
4 Clear Coax signal
5 Drain wire for 4
6 Drain wire for 7
7 Black Coax signal
8 White
9 Yellow
10 White (big)
Shell Braid shield
#24 1
#12
Signal name
Power
Power GND
Pulse width
Video
Video GND
Trig GND
Trig/STC
BZ Tune to scanner
Tune from scanner
No connection
3
X
AWG size
#12
#12
#24
#24
#24
#24
#24
#24
#24
#12