Table of Contents
Advertisement
TYPICAL INDICATIONS
If the AUTO_R AND AUTO_G modes are set to on, the
CLC-200 will find bottom and adjust the gain for the best
view automatically. This can take just a short moment or a
few minutes, depending on the depth and conditions. As
soon as the bottom begins to sweep across the screen in the
graphical view, the digital readout of the depth will appear
in the information view.
You can determine the general hardness of the bottom
by looking at the color content and width of the bottom
signal. Generally, harder bottoms will contain the stronger
echo colors and be of a fairly narrow width. Softer bottoms
will contain weaker echo colors and have a wider overall
width.
Surface Line
Bottom
Figure 16
AutoRange (on)
Fish
Depth Scale
21
AutoGain
(off)
Gain
Level
Scroll Rate
Current
Depth
Battery
Power
0 - 100 %
Advertisement
Table of Contents
