Table of Contents
Advertisement
OPERATION
The CLC-200's control panel contains the basic controls
you need to operate the unit. For example, Range controls
how deep the unit will read and Gain controls how much
signal will be displayed on the screen. This section describes
in detail the controls of the CLC-200.
ON/POWER/OFF
This turns the CLC-200 ON and OFF. If you choose to
modify any of the control features, your settings will be
saved in memory when the unit is turned off or discon-
nected from power. When you turn it on again, the unit
will operate the same way as it did when you last used it.
RANGE CONTROL
The two red buttons at the top of the control panel set
the depth range when the Auto Range Mode is off. Pressing
the
(1) button changes the range to the next shallowest
range. Pressing the
next deeper range.
GAIN CONTROL
The two green buttons control the CLC-200's gain level
when the Auto Gain Mode (located in the menu controls)
is set to off. Pressing the
and
(4) button increases the gain level.
(2) button changes the range to the
(3) decreases the gain level
14
Advertisement
Table of Contents
