ACR Electronics Nauticast Y1-03-0204 Installation Manual page 44

Service Password Menu Example:
N 1
******* Change Service Password ********
Enter new password :
Repeat new password:
----------------------------------------
Enter the new Password: Then push Enter (M5).
Repeat the new Password: Then Push Enter (M5).
A minimum of 6, a maximum of 8 characters are allowed. Should the new password include
numbers, use the shift key to generate them.
Press Save to store the change.
Changing the User Password
Select Submenu 2 "User Password Settings" with cursor button [Up] & [Down] by pressing Nr.
2 on the keyboard.
N 1
-----| |
View | +- 2. User Password Settings
-----| +- 4. Restore Factory Settings
Msg. |
-----|
Displ|
----------------------------------------
NUM| Select->|
Select Submenu 1 "Change User Password" with cursor button [Up] & [Down] by pressing Nr.
1 on the keyboard.
Installation Manual
o o
25' E 0 18' |1>0.10|2>1.30|3>1.80nm
{Length: 6..8 characters}
| Save | |
o o
21' E 0 14' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
| +- 1. Change Service Password
| +- 3. Change MMSI / IMO
|
|
|
|
40
| Back
|<-Back
Y1-03-0204 Rev.K