ACR Electronics Nauticast Y1-03-0204 Installation Manual page 34

Menu „GPS Settings:
Select from the Main Menu "Transponder Configuration " Number 5. Menu is USER
password protected. The default password from the factory is mentioned on your AIS display
at the protection foil. Please see the appendix in your User Manual for additional password
information.. Enter User Password and use the up and down arrows on keypad to select "6.
GPS settings" or "by pressing number 6 on the keypad.
N 1
-----| |
View | +- 2. AIS Status
-----| +- 4. Ship Settings
Msg. | +- 6. Service Configuration
-----| +- 8. Graphical Display Settings
Displ|
----------------------------------------
NUM|Select->|
N48^12' E 16^26' |1> N/A|2> N/A|3>0.00nm
|----------------------------------
| 5. Transponder Configuration
-----| |
| +- 1. Change User Password
View | +- 2. Region Settings
| +- 3. Alarm Settings
-----| +- 4. Interrogation Settings
| +- 5. Sensor Settings
Msg. | +- 6. GPS Settings
|
-----|
|
Displ|
----------------------------------------
NUM|Select->|
N48^12' E 16^26' |1> N/A|2> N/A|3>0.00nm
************* GPS Settings *************
GPS module
Pos. Pinning:
NOTE: The system will restart
----------------------------------------
|
Installation Manual
o o
19' E 0 13' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
| +- 1. Messages
| +- 3. Voyage Settings
| +- 5. Transponder Configuration
| +- 7. Display Settings
|
|
|
: <Jupiter>
On
when saving these settings.
Save | |
30
|<-Back
|<-Back
| Back
Y1-03-0204 Rev.K