Tycon Power Systems TP3000WC Operation Manual page 67

Problem
8000060 Rev 3 19-Feb-19
Solution
3. Do not touch any buttons for several
minutes.
4. The remote sensor search icon
will splash on the display. Wait
several minutes for this icon to turn
off.
5. If the search icon turns off and the
outdoor temperature and humidity
are still showing dashes (--), the
remote sensor is defective. If the
sensor properly syncs up, proceed
to the next step "How to prevent
intermittent wireless
communication"
How to prevent intermittent wireless
communication issues:
1. Install a fresh set of batteries in the
remote sensor array and console.
For cold weather environments,
install lithium batteries.
2. The maximum line of sight
communication range is 300' but
most users will get 100' or less due
to environmental conditions. Move
the sensor and remote closer
together.
3. If the sensor assembly is too close
(less than 5'), move the sensor
assembly away from the display
console.
4. Make sure the remote sensors are
67 TyconSystems.com