Proweatherstation™ Setup - Tycon Power Systems TP3000WC Operation Manual

one month, one-year, total rain and rainfall event.
⚫
Wind speed in mph, km/h, m/s, knots or Beaufort
⚫
Wind direction with 360 degrees
⚫
Wind chill, dew point, and heat index temperature display.
⚫
Barometric, weather forecast.
⚫
MAX, MIN value with time stamp. High/ low alarm.
⚫
Light and UV index
⚫
Non-Volatile Memory: Saves the data when batteries are changed
⚫
WeatherSmart Wi-Fi PC software
⚫
Uploads the data to 3 weather servers: wunderground.com,
Weathercloud, and WeatherObservationsWebsite (WOW)
ProWeatherStation™ Setup
Warning: Any metal object may attract a lightning strike,
including your weather station mounting pole. Never install the
weather station during a storm.
Warning: Installing your weather station in a high location may
result in injury or death. Perform as much of the initial checkout and
assembly on the ground, preferably inside a building or home. Only
install the weather station on a clear, dry day.
Note:
Before placing and installing all components of the weather station at
their destination, please set up the display console(receiver) and outdoor
sensor(transmitter) in a room and get familiar with the functions.
Power up sequence must be performed in the following order: Insert
batteries in the Outdoor Sensor Array first; Display Console second).
Attention:
⚫
Do not mix old and new batteries
⚫
Do not use Rechargeable batteries.
⚫
Use Lithium batteries for sensor array when the outdoor temperature
is lower than 0 degrees Celsius
8000060 Rev 3 19-Feb-19 5 TyconSystems.com