Table of Contents
Advertisement
Full-bridge converter for UPS
2
2
D
PAK/ D
PAK-7 kit
UG_1801_PL16_1802_225559
1.1.1
Key features
The capabilities of the full-bridge converter for UPS with D
•
2
2
D
/D
7-pin kit for MOSFETs
•
Separate V
and bias voltages (12 V is used in this user guide)
in
•
600 V gate driver IC with +/- 4 A peak drive current (IRS2186)
•
Current Sense (CS) information
•
A heatsink can be mounted with four screws, which can be placed at the back or at the front
Figure 2
Heatsink (4 × 2.5 × 0.5 inches) mounted at the front or back with thermal pad
(Heatsink: ACCEL Thermal
User Guide
2
2
/D
7-pin kit are as follows:
914; Thermal pad:
Berguist Gap Pad 5000S35, 20
3
mils)
Revision 1.0
2018-03-01
Advertisement
Table of Contents
