Managing Device Configuration; Setting The Device Transmission Intervals - Ayyeka Wavelet User Manual

Several tabs, enabling:


Managing Device Configuration


Viewing the Files Sent and Received by the Device

Viewing the Device Event Log

Viewing the Commands Sent to the Device

Viewing the Health of the Device

Viewing Device Cellular Information

Managing Device Configuration
The device's Configuration tab enables viewing and changing device configuration definitions. With the exception
of the actions described in the following sub-sections, we recommend not changing these definitions without
consulting with Ayyeka by contacting support@ayyeka.com.

Setting the Device Transmission Intervals

The device transmission interval defines how often the device transmits the data gathered by its sensors.
For every device you can set 3 transmission intervals: Normal, Event and Emergency. Transmission interval
Normal is the default interval. Transmission intervals Event and Emergency are two alternate intervals. Data is
always transmitted at the Normal rate, unless you specify a different rate – either Event or Emergency – when
readings fall within a threshold range (as described in
When setting transmission intervals, keep in mind that very short transmission intervals consume a large amount
of power and network resources.
To view or set the device transmission intervals:
1. Click Devices in the sidebar.
2. In the Sites Tree pane, click the device name.
3. In the right pane, click the Configuration tab.
The currently-defined transmission intervals are displayed.
www.ayyeka.com
Figure 25: Viewing the defined transmission intervals
+1 (310) 876-8040
|
Setting a Threshold's Transmission
info@ayyeka.com
|
Interval).
39