Table of Contents
Advertisement
UNICA
Sanitary water heat pump
The UNICA manual contains all the necessary information for the better use of the equipment under safety conditions for the
operator.
1 PURPOSES AND CONTENTS OF THIS MANUAL
This manual provides basic information as for the installation, the operation and the maintenance of UNICA units. It is addressed
to machine operators and it enables them to use the equipment efficiently, even if they do not have any previous specific
knowledge of it.
This manual describes the characteristics of the equipment at the time it is being put on the market; therefore, it may not capture
later technological improvements introduced by the company as part of its constant endeavour to enhance the performance,
ergonomics, safety and functionality of its products.
The company, therefore, is not constrained to update the manuals for previous versions of machines.
It's recommended that the user must follow the instructions contained in this booklet, especially those concerning the safety and
routine maintenance.
1.1 HOW TO KEEP THIS MANUAL
The manual has to be always kept with the unit it refers to. It has to be stored in a safe place, away from the dust and moisture. It
has to be accessible to all users who shall consult it any time they are in doubt on how to operate the equipment.
The company reserves the right to modify its products and related manuals without necessarily updating previous versions of the
reference material. It assumes no responsibility for any inaccuracies in the manual, if due to printing or transcription.
The customer shall store any updated copy of the manual or parts of it delivered by the manufacturer as an attachment to this
manual.
The company is available to give any detailed information about this manual and to give information regarding the use and the
maintenance of its own units.
1.2 GRAPHIC SYMBOLS USED IN THE MANUAL
Indicates operations that can be dangerous for people and/or disrupt the correct operation of the equipment.
Indicates prohibited operations.
Indicates important information that the operator has to follow in order to guarantee the correct operation of the
equipment in complete safety. It indicates also general notes.
2 SAFETY LAWS
UNICA units have been designed in compliance with the following Directives and Harmonised Norms:
•
Community Directives: 2014/30/UE, 2014/35/UE;
•
Norms: EMC 2004/108/EC; IEC 60335-2-21; IEC 60335-2-40; EN 55014-1; EN 61000-3-2; EN 61000-3-11;
3 PERMITTED USE
•
The company excludes any contractual and no-contractual liability for damage caused to persons, animals or things, by
incorrect installation, adjustment and maintenance, improper use or a partial or superficial reading of the informations
contained in this manual.
•
These units have been designed for water heating. A different application, unless expressly authorized by the manufacturer, is
to be considered improper and therefore not allowed.
•
The location and the hydraulic and electric plant should be determined by the system designer and must take into account
both the purely technical needs as any applicable local legislations and specific authorizations.
•
The execution of all work must be performed by qualified and experienced personnel, competent in the existing rules in
different countries
4
Advertisement
Table of Contents
