Peavey DPE118P Operating Manual page 12

The input signal shall be electronically divided into high frequencies and low frequencies by a
Linkwitz-Riley fourth-order slope line-level frequency variable crossover. The low frequencies
shall be processed to provide bass boost, infrasonic filtering and overall response shaping, and the
high frequencies shall be crossed-over for the satellite speaker output.
The enclosure shall be constructed of 18 mm plywood. A steel handle shall be incorporated on
each side. A powder-coated metal grille shall be provided for woofer protection. The DPE™ 118P
Sub cabinet shall incorporate a threaded pole mounting plate for satellite speaker deployment with
a supplied 1 3/8" diameter threaded steel pole, and four sturdy rubber feet for floor standing use.
The outside dimensions shall be: 26.38" (67.0 cm) tall x 22.88" (58.1 cm) wide x 24.56" (62.4 cm)
deep, and the weight shall be : 86 lbs. Power requirements shall be: 700 Watts nominal, 120 VAC,
50/60 Hz Domestic and 220-240 VAC, 50/60 Hz (Export). The loudspeaker system shall be called
a Peavey® DPE™118P.