Charging The Battery; Switching The Phone On And Off - Nokia 6220 User Manual

Jesse draft_07_TA.fm Page 15 Thursday, May 22, 2003 8:22 AM

■ Charging the battery

1. Connect the lead from the
charger to the socket on the
bottom of your phone.
2. Connect the charger to an AC
wall socket.
The text Charging is displayed
briefly if the phone is switched on. If the battery is completely flat, it
may take a few minutes before the charging indicator appears on the
display or before any calls can be made.
You can use the phone while the charger is connected.
The charging time depends on the charger and the battery used. For
example, charging a BLD-3 battery with the ACP-12 charger takes
approximately one hour and 30 minutes while the phone is in standby
mode.

■ Switching the phone on and off

Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
Press and hold the power key
Note that if the phone displays
though the SIM card is properly inserted, or
not supported, contact your network operator or
service provider. Your phone does not support 5-Volt
SIM cards and the card may need to be changed.
• If the phone asks for a PIN code, key in the PIN
code (for example, displayed as ****), and press
OK.
See also PIN code request
codes on page 9.
• If the phone asks for a security code, key in the security code (for
example, displayed as *****), and press OK.
See also Access codes on page 9.
G e t t i n g s t a r t e d
.
Insert SIM card even
SIM card
in Security settings on page 79 and Access
15