Table of Contents
Advertisement
Configuring the DKVM-IP1
Input a static IP address in the same
range as the DKVM-IP1(192.168.0.xx)
Select
Use the following IP address
IP address:
192.168.0.28
Subnet mask:
255.255.255.0
Click
OK
Click
OK
to apply
the new settings
Open your Web browser and
type
http://192.168.0.70
URL address box. Then press
the Enter or Return key.
Note : 1. If you connect this DKVM-IP1 directly to a PC, you will need a cross-over
Ethernet cable.
2.If you plug the DKVM-IP1 to a Hub or Router, you will be able to use the cable included with
your DKVM-IP1
This installation and configuration of the DKVM-IP1 is now complete.
into the
8
Advertisement
Table of Contents
