Quote And Purchase Specifications - Total Control Systems 700-20 Engineering Manual

QUOTE & PURCHASE SPECIFICATIONS
When issuing quote and purchase specifications and to assure you of receiving a Total Control
Systems meter with all of the many performance, installation, operating, and maintenance
advantages available only with a TCS meter. We suggest that 700 series meter-engineering
specifications include the following statements in addition to a TCS model number and
description.
"Meter shall be of a flow meter with a positive displacement design having rotary motion
without axial thrust or flow disruption. No eccentric, sliding, reciprocating or oscillating parts to
induce excess liquid shear or liquid compressibility within meter element. Meter shall have three
rotors that rotate in unison within the measuring chamber. Rotary parts to be horizontally
supported on both sides by solid support bearings and rotor journals of materials compatible with
product to be metered. Meter shall have stainless steel timing gears with no ball bearings, springs,
or cams. Rotary drive and meter adjustment output to all mechanical readout shall be capable of
infinite meter accuracy adjustment of 0.02% or better. Meter calibration adjustment device must
be externally accessible not requiring removal of any readout equipment for calibration or
replacement. Meter shall immediately respond to product low flow movement."
NOTICE
Total Control Systems (TCS) shall not be liable for technical or editorial errors in this manual or
omissions from this manual. TCS makes no warranties, express or implied, including the
implied warranties of merchantability and fitness for a particular purpose with respect to this
manual and, in no event, shall TCS be liable for special or consequential damages including, but
not limited to, loss of production, loss of profits, etc.
The contents of this publication are presented for informational purposes only, and while every
effort has been made to ensure their accuracy, they are not to be construed as warranties or
guarantees, expressed or implied, regarding the products or services described herein or their use
or applicability. We reserve the right to modify or improve the designs or specifications of such
products at any time.
TCS does not assume responsibility for the selection, use or maintenance of any product.
Responsibility for proper selection, use and maintenance of any TCS product remains solely with
the purchaser and end-user.
All rights reserved. No part of this work may be reproduced or copied in any form or by any
means – graphic, electronic or mechanical – without first receiving the written permission of
Total Control Systems, Fort Wayne, Indiana USA.
- 2 -