Tent installation instructions
Gently raise the tent on its one side and mount pipes (No.1). Three symmetrical holes in pipe should be faced down.
Then lift the tent on the other side and repeat the step.
1
1
Sid ewa lls a ttach with velcro d irectly to the roo f. The n
sidewa lls secure with rub be r ba nds w ith the b all.
Install masking frame to the tent. Four wider masking frames
should be install on the corners.
Install roof pulls on the corners
roofs by means (nr.14) and
(nr.11). All links should be
tightened.
STEP 3
C42
14
11
type S38
The upper part of the entrence install
by the metal mesh(nr.18) to the
18
horizontal links (nr.C42). Then, side of
1 8
the entrnce attach with ruuber bands
with the ball.
8
1
1
1
1
14
14
11
11