Radio; Search For A Station; Direct Access Tuning; To Delete The Registered Id - Kenwood KDC-X303 Instruction Manual

GETTING STARTED
Preparation:
Press B SRC repeatedly to enter STANDBY, then press the volume knob to
enter [FUNCTION].
1 Turn the volume knob to select an item, then press the knob.
[SYSTEM] [REM SETTING]
Remote control ID list is displayed.
• [YES] indicates that this ID is already registered.
• [NO] indicates that this ID is available.
2
Turn the volume knob to select an available ID [REM ID1]/[REM ID2]/
[REM ID3], then press the knob.
"REGISTERING" appears on the display window.
To register, on the KENWOOD Marine Remote Control unit:
• Press ENTER to register as [REM ID1].
• Press SRC to register as [REM ID2].
• Press DISP to register as [REM ID3].
Once the ID is registered, "COMPLETED" appears.

To delete the registered ID

1
Turn the volume knob to select an item, then press the knob.
[SYSTEM] [REM SETTING]
2
Turn the volume knob to select the ID to delete [ID1 DELETE]/[ID2 DELETE]/
[ID3 DELETE], then press the knob.
3 Turn the volume knob to select [YES] to delete the selected ID, and
select [NO] to cancel.
• To exit, press and hold
• To return to the previous setting item, press
6
ENGLISH
JS_KWD_KDC_X303_KN_EN_6th.indd 6
[REMOTE ID SET]
[REMOTE ID DEL]
.
.

RADIO

• "ST" lights up when receiving an FM stereo broadcast with sufficient signal
strength.
• The unit switches to FM alarm automatically when receiving an alarm
signal from FM broadcast.

Search for a station

Press B SRC repeatedly to select RADIO.
1
2
Press BAND repeatedly (or press #FM+/
to select FM1/FM2/FM3/AM.
Press S / T (or press S / T (+) on the remote control) to
3
search for a station.
You can store up to 18 stations for FM and 6 stations for AM.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or
press one of the number buttons (1 to 6) on the remote control).

Direct Access Tuning

(using the remote control)
1
Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a station frequency.
Press ENT IW to search for a station.
3
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.
AM– on the remote control)
*
4/6/2018 11:26:38 AM