Datamars R-UHF-SR420 Quick Start Manual

7. Click on the LiveRead button on the right side of the page and then click on the Start
button. The EPC (Electronic Product Code) of the RFID tag on the antenna is shown
on the LiveRead window. You successfully read the tag!
Cloudburst allows to set-up all the parameters included the network interface of the reader
to connect it to the laundry network and start getting EPCs in the laundry management
software.
For additional information see the Cloudburst online help or the user manual at the
following link: https://www.textile-id.com/cloudburst.
Support
Contact Datamars Textile ID support team at
landline support at +41 91 935 73 80.
UM001331
support-tid@datamars.com or call the
v.2.0 - January 2019
Quick Start Guide
for Speedway R-UHF-SR420 / SR220 / SR120
This guide explains how to start integrating the UHF RFID reader in your laundry.
Reader connectors and indicators
Refer to the following pictures to identify reader's connectors and LED indicators.
Connect the reader through Ethernet interface
1. The RFID reader has DHCP client enabled by default. It can be connected to the laundry
network or directly to your PC for first setup. Follow the next steps if you want to
connect it to your PC directly.
2. Make sure your Local Area Connection adapter is set to obtain an IP address
automatically.
textile-id@datamars.com
www.textile.datamars.com