MINN KOTA i-PILOT Quick Reference Manual page 2

SPOT-LOCK
Engaging Spot-Lock
1. Press the Spot-Lock button on
the remote.
2. The information for the temporary Spot-
Lock location will show up on the display
screen. Use the Menu Up and Menu
Down buttons to find the Save softkey
label at the bottom of the display screen.
To save the Spot-Lock, press the Left
Softkey to open the Save menu.
3. The Save menu brings up a list of Spot-
Locks. Use the Menu Up and Menu
Down buttons to select one of the
Spot-Lock memory locations. Press the
Left Softkey to Save the Spot-Lock
into the selected memory location.
Disengaging Spot-Lock
1. When Spot-Lock is engaged, press
the Spot-Lock button to disengage
Spot-Lock, or use the Menu Up
Menu Down buttons to find the Cancel
softkey label at the bottom of the display
screen. Use the Right Softkey to
select Cancel.
Re-Engage a Saved
Spot-Lock
1. Manually navigate the boat to within
a quarter mile of a saved Spot-Lock
location. Due to safety reasons, i-Pilot
will not re-engage a saved Spot-Lock
location greater than a quarter mile away.
2. Press the GOTO button on the remote.
3. The Spot-Lock menu will appear on the
display screen. Use the Menu Up
and Menu Down buttons to scroll to a
saved Spot-Lock location in the menu.
4. Press the Ok button to select a saved
Spot-Lock location.
2 | minnkotamotors.com
Spot-Lock Jog
(Heading Sensor required.)
1. To engage Spot-Lock Jog, first engage
Spot-Lock. Use the Speed Down
backward), Speed Up
Steer Left (jog left), and Steer Right
(jog right) buttons to jog the Spot-
Lock location 5 feet in the selected
direction from the current Spot-Lock
location.
CRUISE CONTROL
Engaging Cruise Control
1. Press the Cruise Control
the remote.
2. The Target Speed will appear on the
display screen. Press the Speed Down
or Speed Up buttons to adjust the
Target Speed.
Disengaging Cruise Control
1. When Cruise Control is engaged, press
and
the Cruise Control button on the
remote to disengage Cruise Control.
HIGH SPEED BYPASS
Engaging High Speed Bypass
1. Double press the High Speed
Bypass button.
2. The Prop Speed will automatically go
to speed 10.
Disengaging High Speed
Bypass
1. When High Speed Bypass is engaged,
press the High Speed Bypass
on the remote to disengage High
Speed Bypass, or press the Speed
Down button.
©2018 Johnson Outdoors Marine Electronics, Inc.
AUTOPILOT
Engaging AutoPilot or
(jog
Advanced AutoPilot
(jog forward),
1. Press the AutoPilot
the remote.
2. The AutoPilot or Advanced AutoPilot icon
will display on the screen.
3. To adjust the desired heading, manually
steer the motor to the new heading.
i-Pilot will automatically lock onto the
new heading.
Disengaging AutoPilot or
button on
Advanced AutoPilot
1. When either AutoPilot mode is engaged,
press the AutoPilot
remote to disengage AutoPilot.
iTRACK
Recording an iTrack
1. Use the Menu Up
buttons to find the Record softkey label
at the bottom of the display screen.
2. Press the Left Softkey
Record menu.
3. The Record menu brings up a listing of
iTracks. Use the Menu Up
Down
iTrack memory locations.
4. Press the Ok
iTrack memory location. Once a location
is selected, the current location of the
boat becomes the To Start location of the
iTrack being recorded.
5. Navigate the boat along the desired
path or course. AutoPilot and/or Cruise
button Control can be used while recording
an iTrack.
6. To stop recording an iTrack, use the Menu
Up or Menu Down
©2018 Johnson Outdoors Marine Electronics, Inc.
7. Use the Left Softkey
8. The recording will end automatically if
button on
Navigating an iTrack
1. Manually navigate the boat to within a
2. Press the GO TO
button on the
3. Use the Menu Up
4. Using the Left Softkey
or Menu Down
to select the
Reverse an iTrack
1. The direction that the iTrack is being
and Menu
buttons to scroll to one of the
button to select an
buttons to find
the Stop softkey label at the bottom of
the display screen.
to select Stop.
the two-mile distance limit is reached for
the iTrack or if the Spot-Lock or GO
TO button is pressed.
quarter mile of the saved iTrack. Due to
safety reasons, i-Pilot will not re-engage
a saved iTrack greater than a quarter
mile away.
button on the
remote. The remote default is to first
bring up saved Spot-Locks. Press
the Right Softkey to bring up
saved iTracks.
or Menu Down
buttons to select an iTrack to navigate.
or Right
Softkey select the softkey label
to either go To Start or To End. The boat
will navigate to the closest point on the
iTrack and then navigate To Start or To
End depending on the selection made
until it reaches that point.
navigated can be reversed while the GO
TO action is taking place. Use the Menu
Up or Menu Down buttons to find
the Reverse softkey label at the bottom of
the display screen. Use the Left Softkey
to select Reverse.
Scan to view the
complete i-Pilot
Owner's Manual
online.
minnkotamotors.com | 3