Table of Contents
Advertisement
OPERATION
WORK LIGHT
1. Push and hold the ON/OFF button
for 3 seconds to turn the work light
on.
2. Push the ON/OFF button again.
• The work light flashes on and
off.
3. Push the ON/OFF button again.
• The work light flashes with the
morse code SOS pattern.
4. Push the ON/OFF button again to turn the work light off.
USB POWER SUPPLY
• This will supply a maximum of 2.1A at 5V.
1. Put the USB cable into one of the
USB sockets.
2. Connect the other end of the
cable to your device.
• The supplied lead has 4 plugs
on one end which can be used
to charge a variety of devices.
3. Push the ON/OFF button to start
supplying power.
• This supplies a maximum of 2.1A
at 5V.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
7
Advertisement
Table of Contents
