Table of Contents
Advertisement
TO CHARGE THE POWER PACK
You can recharge the power pack
using:
• The mains charger (A) or
• The cigar lighter adapter (B).
1. Switch the power pack off.
2. Plug the mains charger or cigar
lighter adapter into the charger
input socket
3. If you are using the cigar lighter
adapter, start the engine.
4. Connect the other end to either
the mains supply or cigar lighter
socket.
5. When all 4 power indicator lights on the top are lit, disconnect the charger.
TO GET THE MAXIMUM LIFE FROM THE BATTERY
• Charge this device before first use.
• Recharge after every use or a minimum of every 3 months.
• Do not leave the unit in a state of discharge.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
6
Advertisement
Table of Contents
