Table of Contents
Advertisement
PHONE FUNCTION
Phone function
In Main Interface, press
key to make calling.
Please operate according to the hint in this interface.
10086
In case of following condition, No GSM network, in Arm mode, on alarm, making a call
!
is forbidden.
22
10086
Daily operation
The user can control the alarm host by any of following ways：
Remote control, Keyboard, RFID card.
Remote SMS.
Mobile phone APP.
GPRS alarm center.
Out Arm
press 【
】key to activate Out Arm.
By remote control:
By keyboard:
In Main Interface, press
By RFID card:
In Disarm mode, put the RFID card close to the sensitive area on
bottom right corner of the alarm host.
By remote SMS:
Send SMS message 1234#1
the alarm host will feedback "System Armed! SMS to mobile phone to confirm.
By APP:
In Main Menu, select "
"
icon, then select delay arm time(exit delay).
After around 3 seconds, Out Arm mode is completed.
The alarm host reminder:
A reminding voice "System armed" will be heard, the
Main Interface displays "Armed" and "Please exit", and an exit time progress bar
appears. The user should leave the alarm zone before exit time. If Arm/Disarm SMS
switch is on,the preset phone will receive "Sytem Armed
Under Out Arm mode, all defense zones are on alert status. If any defense zone is
!
triggered, the alarm host will generate a local siren alarm, and send alarm SMS or make
calling to the preset phone numbers , simultaneously send the alarm message to mobile
phone APP or GPRS alarm center.
Refer to below diagram:
1
2
Cancel
DAILY OPERATION
to activate Out Arm.
*
ARM/
（
1234 is user password) at first, then
"
!"
SMS.
3
O K
On-time status
of alarm host
23
Hide quick links:
Advertisement
Table of Contents
