How To Set Phone Numbers For Sms And Phone Calls; Exit/Entry Delay - Earykong G4 User Manual

How to Set Phone Numbers for SMS and Phone Calls

Up to 5 stored Phone Numbers will receive text messages (SMS) and phone calls in
case of triggered alarms. Each number could be set independently to one of three
alarm modes: ①SMS notification only, ②call only, ③both SMS notification and call.
Setting Steps
 Enter System Password + √"
 Choose "Set Phone Number" + √
 Choose "Set Phone Number" + √
 Input Phone Number + √
 Choose the mode + √
Phone Number Mode:
①Delete the specified phone number ②SMS (SMS notification only) ③Alarm call
(call only) ④SMS, Alarm call (both SMS notification and call)
The hub will make phone calls to the stored phone numbers successively (up to 2
rounds in turn). If the phone call is answered and any Keypad Command has been
operated by one of these users, it will stop calling the next phone number; otherwise it
will continue to remind users until it is up to 2 rounds.
When the stored phone calls the hub, two-way talk is connected automatically.
Keypad Commands
How
Delete All Phone Numbers
 Enter System Password + √"
 Choose "Set Phone Number" + √
 Choose "Delete All" + √
 Enter √
Exit / Entry Delay
Entry Delay and Exit Delay are countdowns that allow you to enter and leave your
home easily without causing the alarm to sound.
Exit Delay
Exit Delay allows you to leave your home once you've armed the security system.
When you place the system into Away Arm Mode, it makes a countdown tick to let you
know that it is preparing to arm. Once the Exit Delay period ends, The system is
armed.Give yourself enough time to exit your home before the countdown ends. You
can adjust the countdown timing from 0(No Exit Delay) to 255 seconds. The default
WHAT HAPPENS
Arm
Disarm or silence when the alarming is sounding
Two-way talk
to
13