Maintenance; Motor Seal; Blades And Plates; Grating Discs - Robot Coupe CL 55 e Operating Instructions Manual

I M p O R t A n t
Check that your detergent is suitable for
cleaning plastic parts. Some washing agents
are too alkaline (e.g. high levels of caustic
soda or ammonia) and totally incompatible
with certain types of plastic, causing them to
deteriorate rapidly.

MAIntenAnCe

• MOtOR SeAl

The motor seal on the shaft should be lubricated
regularly using a food safe lubricant.
In order to keep the motor completely watertight,
it is advisable to check the motor seal regularly for
wear and tear and replace if necessary.
The motor seal can be easily replaced without
having to remove the motor, so we strongly advise
you to ensure that is in good condition.

• BlAdeS And plAteS

The blades on all our discs are wearing parts that
need to be replaced from time to time, in order to
maintain consistently high cutting quality.

• gRAtIng dISCS

Grating discs deteriorate over time. We recommend
you replace them from time to time, in order to
maintain consistently high cutting quality
teCHnICAl
SpeCIfICAtIOnS
• WeIgHt (lbs)
Net
CL 55 without a trolley 60
Motor base 40
Pusher feed-head 20
Hole feed-heads 19
Automatic feed-head 13
Stainless steel stand 22
Disc 1.1

• WORKIng HeIgHt

the Cl 55 is mounted on a stainless-steel base,
which we advise you to place on a stable surface.
The included stainless steel stand positions the
machine at the ideal working height.

• nOISe leVel

The equivalent continuous sound level when the CL 55
is operating on no-load is less than 70 dB (A).
W A R n I n g
the discs are extremely sharp.
Handle with care. Always use cutting gloves.
the Cl 55 is fitted with magnetic safety system
which stops the motor as soon as the large hopper
or lid is opened, thus preventing any access to the
cutting tool while it is in motion.
As soon as the lid opens, the motor stops.
Gross
To restart your machine, simply relock the lid and
73
press the green switch.
42
When using the hopper equipped with a lever, the
31
motor is stopped as soon as the lever is removed
23
from the bowl. To start the machine again, you
15
should simply position the lever at the aligned with
23
the base of the bowl.
1.3
The Cl 55 is fitted with a temperature fuse which
automatically stops the motor if the machine is left on
for too long or overloaded. If this happens, allow the
machine to cool completely before restarting.
The hinge pin must be fitted in its position at the back
of the motor unit before the machine is switched on.
R e M I n d e R
do not open the lid until the motor has come
to a complete stop.
never tamper with the locking and safety
systems.
SAfetY
never put a hard or non-food object in the
bowl while the machine is operating.
never force the ingredients down with your
hands.
do not overload the machine.
11